-- ********************************************************************* -- * ispGDX80VA 100 pin TQFP BSDL Model * -- * * -- * File Version: v1.03 * -- * File Date: Nov. 30, 2001 * -- * * -- * Standard Test Access Port and Boundary-Scan Architecture * -- * VHDL Description File * -- * * -- * This BSDL can be used for Boundary-Scan Test as well as * -- * ISC 1532 Programming support. * -- * * -- * This BSDL file is created according to: * -- * - IEEE 1532 2001 spec. * -- * - IEEE 1149.1 1994 spec. * -- * * -- * This BSDL file has been syntax checked with: * -- * - Lattice BSDL Syntax Checker * -- * - Agilent BSDL Syntax Checker * -- * * -- * Copyright 2000, 2001 Lattice Semiconductor Corporation * -- * 5555 NE Moore Ct., Hillsboro, OR 97124 * -- * All rights reserved. No part of this program or publication * -- * may be reproduced, transmitted, transcribed, stored in a * -- * retrieval system, or translated into any language or * -- * computer language, in any form or by any means without this * -- * notice appearing within. * -- ********************************************************************* -- * * -- * IMPORTANT * -- * * -- * The following is a BSDL file that tests all of the I/O pins * -- * as bidirectional pins. The functionality of the BSCAN register * -- * for this device is independent of the pattern programmed * -- * into the device. An additional programming step is not * -- * required to configure the I/O pins prior to BSCAN test. * -- * * -- * This file contains additional information that may cause a BSDL * -- * parser to reject or error if your parser does not contain the * -- * 1532 library. BSDL files without ISC extensions are available * -- * on the Lattice website at www.latticesemi.com. * -- * * -- * For Further assistance, please contact Tech Support at * -- * 1-800-LATTICE or techsupport@latticesemi.com * -- ********************************************************************* -- * * -- * REVISION HISTORY * -- * * -- * Rev 1.02: 11/30/2001 * -- * - Changed entity name from ispGDX80VA_XXLT100 to * -- * ispGDX80VA_XXT100. * -- * Rev 1.01: 10/25/2001 * -- * - Changed EPEN from in bit to linkage bit. * -- * Rev 1.00: 09/24/2001 * -- * - Initial Release. * -- * * -- ********************************************************************* -- The Overall Structure of the Entity Description entity ispGDX80VA_XXT100 is -- Generic Parameter Statement generic (PHYSICAL_PIN_MAP : string := "TQFP_100"); -- Logical Port Description Statement port ( TDI: in bit; -- JTAG input pin TMS: in bit; -- JTAG input pin TCK: in bit; -- JTAG input pin TDO: out bit; -- JTAG output pin TOE: in bit; EPEN: linkage bit; -- EPEN pin -- RESET: in bit; -- Active low RESET pin Clk: in bit; -- Clock input pins IOA: inout bit_vector (0 to 19); -- Bi-Directional pins IOB: inout bit_vector (0 to 19); -- Bi-Directional pins IOC: inout bit_vector (0 to 19); -- Bi-Directional pins IOD: inout bit_vector (0 to 19); -- Bi-Directional pins VCC: linkage bit_vector (0 to 4); -- VCC pins GND: linkage bit_vector (0 to 7) -- GND pins ); -- Version Control use STD_1149_1_1994.all; -- 1149.1-1994 attributes use STD_1532_2001.all; -- 1532 2001 attributes attribute COMPONENT_CONFORMANCE of ispGDX80VA_XXT100 : entity is "STD_1149_1_1993"; attribute PIN_MAP of ispGDX80VA_XXT100 : entity is PHYSICAL_PIN_MAP; constant TQFP_100: PIN_MAP_STRING:= "TDI:39," & -- JTAG (TDI) input pin "TMS:86," & -- JTAG (TMS) input pin "TCK:36," & -- JTAG (TCK) input pin "TDO:85," & -- JTAG (TDO) output pin "TOE:87," & -- "RESET:90," & -- RESET input pin "EPEN:35," & -- EPEN control pin "Clk:38, " & -- Clock pins "IOA:( 1, 2, 3, 4, 5, 7, 8, " & " 9, 10, 11, 13, 14, 15, 16, " & " 17, 19, 20, 21, 22, 23), " & -- IOA0-19 "IOB:( 24, 25, 26, 27, 28, 30, 31, " & " 32, 33, 34, 40, 41, 42, 43, " & " 44, 46, 47, 48, 49, 50), " & -- IOB0-19 "IOC:( 51, 52, 53, 54, 55, 57, 58, " & " 59, 60, 61, 63, 64, 65, 66, " & " 67, 69, 70, 71, 72, 73), " & -- IOC0-19 "IOD:( 74, 75, 76, 77, 78, 80, 81, " & " 82, 83, 84, 90, 91, 92, 93, " & " 94, 96, 97, 98, 99, 100), " & -- IOD0-19 "VCC:( 12, 37, 62, 88, 89), " & -- VCC pins "GND:( 6, 18, 29, 45, 56, 68, 79, " & -- GND pins " 95) " ; -- GND pins -- Scan Port Identification attribute TAP_SCAN_CLOCK of TCK : Signal is (20.0e6, BOTH); attribute TAP_SCAN_IN of TDI : Signal is True; attribute TAP_SCAN_OUT of TDO : Signal is True; attribute TAP_SCAN_MODE of TMS : Signal is True; -- Instruction Register Description attribute INSTRUCTION_LENGTH of ispGDX80VA_XXT100 : entity is 5; attribute INSTRUCTION_OPCODE of ispGDX80VA_XXT100 : entity is -- 1149.1 instructions "BYPASS (11111),"& "SAMPLE (11100),"& "EXTEST (00000),"& "HIGHZ (11000),"& "IDCODE (10110),"& "USERCODE (10111),"& -- ISC instructions "ISC_NOOP (11001),"& "ISC_READ (01010),"& "ISC_ERASE (00011),"& "ISC_ENABLE (10101),"& "ISC_DISABLE (11110),"& "ISC_DISCHARGE (10100),"& "ISC_PROGRAM_SECURITY (01001),"& "ISC_DATA_SHIFT (00010),"& "ISC_ADDRESS_SHIFT (00001),"& -- Lattice Specific and Private instructions "LSC_PROGRAM (00111),"& "LSC_PROGRAM_USERCODE (11010),"& "PRIVATE (00100,00101,00110,01000,10010,"& "01100,01110,01111,10001,10011,"& "01011,11011,11101,10000)"; attribute INSTRUCTION_CAPTURE of ispGDX80VA_XXT100 : entity is "11001"; attribute INSTRUCTION_PRIVATE of ispGDX80VA_XXT100 : entity is "PRIVATE"; -- IDCODE Definition attribute IDCODE_REGISTER of ispGDX80VA_XXT100: entity is "0001" & -- version (1) "0000001101010000" & -- part number (0350) "00000100001" & -- manufacturer's identity (043) "1" ; -- required by 1149.1 -- USERCODE Definition attribute USERCODE_REGISTER of ispGDX80VA_XXT100: entity is "11111111111111111111111111111111"; -- Register Access Description attribute REGISTER_ACCESS of ispGDX80VA_XXT100 : entity is "BOUNDARY (SAMPLE, EXTEST),"& "BYPASS (BYPASS, HIGHZ),"& "DEVICE_ID (USERCODE, IDCODE),"& "ISC_ADDRESS[100] (ISC_ADDRESS_SHIFT, LSC_PROGRAM),"& "ISC_DATA[160] (ISC_DATA_SHIFT),"& "ISC_Rdata[160] (ISC_READ),"& "ISC_DEFAULT[1] (LSC_PROGRAM_USERCODE, ISC_PROGRAM_SECURITY,"& " ISC_DISCHARGE, ISC_DISABLE, ISC_ENABLE,"& " ISC_ERASE, ISC_NOOP)"; -- ***************************************************************** -- Boundary Scan Register Description, Cell 0 is the closest to TDO -- ***************************************************************** attribute BOUNDARY_LENGTH of ispGDX80VA_XXT100 : entity is 243; attribute BOUNDARY_REGISTER of ispGDX80VA_XXT100 : entity is "0242 (BC_1, *, INTERNAL, X)," & --RESET "0241 (BC_1, TOE, INPUT, X)," & --Y1/CLKEN1/TOE "0240 (BC_1, Clk, INPUT, X)," & --Y0/CLKEN0 "0239 (BC_1, *, CONTROL, 0)," & "0238 (BC_1, IOB(10), OUTPUT3, X, 239, 0, Z)," & "0237 (BC_1, IOB(10), INPUT, X)," & "0236 (BC_1, *, CONTROL, 0)," & "0235 (BC_1, IOB(11), OUTPUT3, X, 236, 0, Z)," & "0234 (BC_1, IOB(11), INPUT, X)," & "0233 (BC_1, *, CONTROL, 0)," & "0232 (BC_1, IOB(12), OUTPUT3, X, 233, 0, Z)," & "0231 (BC_1, IOB(12), INPUT, X)," & "0230 (BC_1, *, CONTROL, 0)," & "0229 (BC_1, IOB(13), OUTPUT3, X, 230, 0, Z)," & "0228 (BC_1, IOB(13), INPUT, X)," & "0227 (BC_1, *, CONTROL, 0)," & "0226 (BC_1, IOB(14), OUTPUT3, X, 227, 0, Z)," & "0225 (BC_1, IOB(14), INPUT, X)," & "0224 (BC_1, *, CONTROL, 0)," & "0223 (BC_1, IOB(15), OUTPUT3, X, 224, 0, Z)," & "0222 (BC_1, IOB(15), INPUT, X)," & "0221 (BC_1, *, CONTROL, 0)," & "0220 (BC_1, IOB(16), OUTPUT3, X, 221, 0, Z)," & "0219 (BC_1, IOB(16), INPUT, X)," & "0218 (BC_1, *, CONTROL, 0)," & "0217 (BC_1, IOB(17), OUTPUT3, X, 218, 0, Z)," & "0216 (BC_1, IOB(17), INPUT, X)," & "0215 (BC_1, *, CONTROL, 0)," & "0214 (BC_1, IOB(18), OUTPUT3, X, 215, 0, Z)," & "0213 (BC_1, IOB(18), INPUT, X)," & "0212 (BC_1, *, CONTROL, 0)," & "0211 (BC_1, IOB(19), OUTPUT3, X, 212, 0, Z)," & "0210 (BC_1, IOB(19), INPUT, X)," & "0209 (BC_1, *, CONTROL, 0)," & "0208 (BC_1, IOC(0), OUTPUT3, X, 209, 0, Z)," & "0207 (BC_1, IOC(0), INPUT, X)," & "0206 (BC_1, *, CONTROL, 0)," & "0205 (BC_1, IOC(1), OUTPUT3, X, 206, 0, Z)," & "0204 (BC_1, IOC(1), INPUT, X)," & "0203 (BC_1, *, CONTROL, 0)," & "0202 (BC_1, IOC(2), OUTPUT3, X, 203, 0, Z)," & "0201 (BC_1, IOC(2), INPUT, X)," & "0200 (BC_1, *, CONTROL, 0)," & "0199 (BC_1, IOC(3), OUTPUT3, X, 200, 0, Z)," & "0198 (BC_1, IOC(3), INPUT, X)," & "0197 (BC_1, *, CONTROL, 0)," & "0196 (BC_1, IOC(4), OUTPUT3, X, 197, 0, Z)," & "0195 (BC_1, IOC(4), INPUT, X)," & "0194 (BC_1, *, CONTROL, 0)," & "0193 (BC_1, IOC(5), OUTPUT3, X, 194, 0, Z)," & "0192 (BC_1, IOC(5), INPUT, X)," & "0191 (BC_1, *, CONTROL, 0)," & "0190 (BC_1, IOC(6), OUTPUT3, X, 191, 0, Z)," & "0189 (BC_1, IOC(6), INPUT, X)," & "0188 (BC_1, *, CONTROL, 0)," & "0187 (BC_1, IOC(7), OUTPUT3, X, 188, 0, Z)," & "0186 (BC_1, IOC(7), INPUT, X)," & "0185 (BC_1, *, CONTROL, 0)," & "0184 (BC_1, IOC(8), OUTPUT3, X, 185, 0, Z)," & "0183 (BC_1, IOC(8), INPUT, X)," & "0182 (BC_1, *, CONTROL, 0)," & "0181 (BC_1, IOC(9), OUTPUT3, X, 182, 0, Z)," & "0180 (BC_1, IOC(9), INPUT, X)," & "0179 (BC_1, *, CONTROL, 0)," & "0178 (BC_1, IOC(10), OUTPUT3, X, 179, 0, Z)," & "0177 (BC_1, IOC(10), INPUT, X)," & "0176 (BC_1, *, CONTROL, 0)," & "0175 (BC_1, IOC(11), OUTPUT3, X, 176, 0, Z)," & "0174 (BC_1, IOC(11), INPUT, X)," & "0173 (BC_1, *, CONTROL, 0)," & "0172 (BC_1, IOC(12), OUTPUT3, X, 173, 0, Z)," & "0171 (BC_1, IOC(12), INPUT, X)," & "0170 (BC_1, *, CONTROL, 0)," & "0169 (BC_1, IOC(13), OUTPUT3, X, 170, 0, Z)," & "0168 (BC_1, IOC(13), INPUT, X)," & "0167 (BC_1, *, CONTROL, 0)," & "0166 (BC_1, IOC(14), OUTPUT3, X, 167, 0, Z)," & "0165 (BC_1, IOC(14), INPUT, X)," & "0164 (BC_1, *, CONTROL, 0)," & "0163 (BC_1, IOC(15), OUTPUT3, X, 164, 0, Z)," & "0162 (BC_1, IOC(15), INPUT, X)," & "0161 (BC_1, *, CONTROL, 0)," & "0160 (BC_1, IOC(16), OUTPUT3, X, 161, 0, Z)," & "0159 (BC_1, IOC(16), INPUT, X)," & "0158 (BC_1, *, CONTROL, 0)," & "0157 (BC_1, IOC(17), OUTPUT3, X, 158, 0, Z)," & "0156 (BC_1, IOC(17), INPUT, X)," & "0155 (BC_1, *, CONTROL, 0)," & "0154 (BC_1, IOC(18), OUTPUT3, X, 155, 0, Z)," & "0153 (BC_1, IOC(18), INPUT, X)," & "0152 (BC_1, *, CONTROL, 0)," & "0151 (BC_1, IOC(19), OUTPUT3, X, 152, 0, Z)," & "0150 (BC_1, IOC(19), INPUT, X)," & "0149 (BC_1, *, CONTROL, 0)," & "0148 (BC_1, IOD(0), OUTPUT3, X, 149, 0, Z)," & "0147 (BC_1, IOD(0), INPUT, X)," & "0146 (BC_1, *, CONTROL, 0)," & "0145 (BC_1, IOD(1), OUTPUT3, X, 146, 0, Z)," & "0144 (BC_1, IOD(1), INPUT, X)," & "0143 (BC_1, *, CONTROL, 0)," & "0142 (BC_1, IOD(2), OUTPUT3, X, 143, 0, Z)," & "0141 (BC_1, IOD(2), INPUT, X)," & "0140 (BC_1, *, CONTROL, 0)," & "0139 (BC_1, IOD(3), OUTPUT3, X, 140, 0, Z)," & "0138 (BC_1, IOD(3), INPUT, X)," & "0137 (BC_1, *, CONTROL, 0)," & "0136 (BC_1, IOD(4), OUTPUT3, X, 137, 0, Z)," & "0135 (BC_1, IOD(4), INPUT, X)," & "0134 (BC_1, *, CONTROL, 0)," & "0133 (BC_1, IOD(5), OUTPUT3, X, 134, 0, Z)," & "0132 (BC_1, IOD(5), INPUT, X)," & "0131 (BC_1, *, CONTROL, 0)," & "0130 (BC_1, IOD(6), OUTPUT3, X, 131, 0, Z)," & "0129 (BC_1, IOD(6), INPUT, X)," & "0128 (BC_1, *, CONTROL, 0)," & "0127 (BC_1, IOD(7), OUTPUT3, X, 128, 0, Z)," & "0126 (BC_1, IOD(7), INPUT, X)," & "0125 (BC_1, *, CONTROL, 0)," & "0124 (BC_1, IOD(8), OUTPUT3, X, 125, 0, Z)," & "0123 (BC_1, IOD(8), INPUT, X)," & "0122 (BC_1, *, CONTROL, 0)," & "0121 (BC_1, IOD(9), OUTPUT3, X, 122, 0, Z)," & "0120 (BC_1, IOD(9), INPUT, X)," & "0119 (BC_1, *, CONTROL, 0)," & "0118 (BC_1, IOB(9), OUTPUT3, X, 119, 0, Z)," & "0117 (BC_1, IOB(9), INPUT, X)," & "0116 (BC_1, *, CONTROL, 0)," & "0115 (BC_1, IOB(8), OUTPUT3, X, 116, 0, Z)," & "0114 (BC_1, IOB(8), INPUT, X)," & "0113 (BC_1, *, CONTROL, 0)," & "0112 (BC_1, IOB(7), OUTPUT3, X, 113, 0, Z)," & "0111 (BC_1, IOB(7), INPUT, X)," & "0110 (BC_1, *, CONTROL, 0)," & "0109 (BC_1, IOB(6), OUTPUT3, X, 110, 0, Z)," & "0108 (BC_1, IOB(6), INPUT, X)," & "0107 (BC_1, *, CONTROL, 0)," & "0106 (BC_1, IOB(5), OUTPUT3, X, 107, 0, Z)," & "0105 (BC_1, IOB(5), INPUT, X)," & "0104 (BC_1, *, CONTROL, 0)," & "0103 (BC_1, IOB(4), OUTPUT3, X, 104, 0, Z)," & "0102 (BC_1, IOB(4), INPUT, X)," & "0101 (BC_1, *, CONTROL, 0)," & "0100 (BC_1, IOB(3), OUTPUT3, X, 101, 0, Z)," & "0099 (BC_1, IOB(3), INPUT, X)," & "0098 (BC_1, *, CONTROL, 0)," & "0097 (BC_1, IOB(2), OUTPUT3, X, 98, 0, Z)," & "0096 (BC_1, IOB(2), INPUT, X)," & "0095 (BC_1, *, CONTROL, 0)," & "0094 (BC_1, IOB(1), OUTPUT3, X, 95, 0, Z)," & "0093 (BC_1, IOB(1), INPUT, X)," & "0092 (BC_1, *, CONTROL, 0)," & "0091 (BC_1, IOB(0), OUTPUT3, X, 92, 0, Z)," & "0090 (BC_1, IOB(0), INPUT, X)," & "0089 (BC_1, *, CONTROL, 0)," & "0088 (BC_1, IOA(19), OUTPUT3, X, 89, 0, Z)," & "0087 (BC_1, IOA(19), INPUT, X)," & "0086 (BC_1, *, CONTROL, 0)," & "0085 (BC_1, IOA(18), OUTPUT3, X, 86, 0, Z)," & "0084 (BC_1, IOA(18), INPUT, X)," & "0083 (BC_1, *, CONTROL, 0)," & "0082 (BC_1, IOA(17), OUTPUT3, X, 83, 0, Z)," & "0081 (BC_1, IOA(17), INPUT, X)," & "0080 (BC_1, *, CONTROL, 0)," & "0079 (BC_1, IOA(16), OUTPUT3, X, 80, 0, Z)," & "0078 (BC_1, IOA(16), INPUT, X)," & "0077 (BC_1, *, CONTROL, 0)," & "0076 (BC_1, IOA(15), OUTPUT3, X, 77, 0, Z)," & "0075 (BC_1, IOA(15), INPUT, X)," & "0074 (BC_1, *, CONTROL, 0)," & "0073 (BC_1, IOA(14), OUTPUT3, X, 74, 0, Z)," & "0072 (BC_1, IOA(14), INPUT, X)," & "0071 (BC_1, *, CONTROL, 0)," & "0070 (BC_1, IOA(13), OUTPUT3, X, 71, 0, Z)," & "0069 (BC_1, IOA(13), INPUT, X)," & "0068 (BC_1, *, CONTROL, 0)," & "0067 (BC_1, IOA(12), OUTPUT3, X, 68, 0, Z)," & "0066 (BC_1, IOA(12), INPUT, X)," & "0065 (BC_1, *, CONTROL, 0)," & "0064 (BC_1, IOA(11), OUTPUT3, X, 65, 0, Z)," & "0063 (BC_1, IOA(11), INPUT, X)," & "0062 (BC_1, *, CONTROL, 0)," & "0061 (BC_1, IOA(10), OUTPUT3, X, 62, 0, Z)," & "0060 (BC_1, IOA(10), INPUT, X)," & "0059 (BC_1, *, CONTROL, 0)," & "0058 (BC_1, IOA(9), OUTPUT3, X, 59, 0, Z)," & "0057 (BC_1, IOA(9), INPUT, X)," & "0056 (BC_1, *, CONTROL, 0)," & "0055 (BC_1, IOA(8), OUTPUT3, X, 56, 0, Z)," & "0054 (BC_1, IOA(8), INPUT, X)," & "0053 (BC_1, *, CONTROL, 0)," & "0052 (BC_1, IOA(7), OUTPUT3, X, 53, 0, Z)," & "0051 (BC_1, IOA(7), INPUT, X)," & "0050 (BC_1, *, CONTROL, 0)," & "0049 (BC_1, IOA(6), OUTPUT3, X, 50, 0, Z)," & "0048 (BC_1, IOA(6), INPUT, X)," & "0047 (BC_1, *, CONTROL, 0)," & "0046 (BC_1, IOA(5), OUTPUT3, X, 47, 0, Z)," & "0045 (BC_1, IOA(5), INPUT, X)," & "0044 (BC_1, *, CONTROL, 0)," & "0043 (BC_1, IOA(4), OUTPUT3, X, 44, 0, Z)," & "0042 (BC_1, IOA(4), INPUT, X)," & "0041 (BC_1, *, CONTROL, 0)," & "0040 (BC_1, IOA(3), OUTPUT3, X, 41, 0, Z)," & "0039 (BC_1, IOA(3), INPUT, X)," & "0038 (BC_1, *, CONTROL, 0)," & "0037 (BC_1, IOA(2), OUTPUT3, X, 38, 0, Z)," & "0036 (BC_1, IOA(2), INPUT, X)," & "0035 (BC_1, *, CONTROL, 0)," & "0034 (BC_1, IOA(1), OUTPUT3, X, 35, 0, Z)," & "0033 (BC_1, IOA(1), INPUT, X)," & "0032 (BC_1, *, CONTROL, 0)," & "0031 (BC_1, IOA(0), OUTPUT3, X, 32, 0, Z)," & "0030 (BC_1, IOA(0), INPUT, X)," & "0029 (BC_1, *, CONTROL, 0)," & "0028 (BC_1, IOD(19), OUTPUT3, X, 29, 0, Z)," & "0027 (BC_1, IOD(19), INPUT, X)," & "0026 (BC_1, *, CONTROL, 0)," & "0025 (BC_1, IOD(18), OUTPUT3, X, 26, 0, Z)," & "0024 (BC_1, IOD(18), INPUT, X)," & "0023 (BC_1, *, CONTROL, 0)," & "0022 (BC_1, IOD(17), OUTPUT3, X, 23, 0, Z)," & "0021 (BC_1, IOD(17), INPUT, X)," & "0020 (BC_1, *, CONTROL, 0)," & "0019 (BC_1, IOD(16), OUTPUT3, X, 20, 0, Z)," & "0018 (BC_1, IOD(16), INPUT, X)," & "0017 (BC_1, *, CONTROL, 0)," & "0016 (BC_1, IOD(15), OUTPUT3, X, 17, 0, Z)," & "0015 (BC_1, IOD(15), INPUT, X)," & "0014 (BC_1, *, CONTROL, 0)," & "0013 (BC_1, IOD(14), OUTPUT3, X, 14, 0, Z)," & "0012 (BC_1, IOD(14), INPUT, X)," & "0011 (BC_1, *, CONTROL, 0)," & "0010 (BC_1, IOD(13), OUTPUT3, X, 11, 0, Z)," & "0009 (BC_1, IOD(13), INPUT, X)," & "0008 (BC_1, *, CONTROL, 0)," & "0007 (BC_1, IOD(12), OUTPUT3, X, 8, 0, Z)," & "0006 (BC_1, IOD(12), INPUT, X)," & "0005 (BC_1, *, CONTROL, 0)," & "0004 (BC_1, IOD(11), OUTPUT3, X, 5, 0, Z)," & "0003 (BC_1, IOD(11), INPUT, X)," & "0002 (BC_1, *, CONTROL, X)," & "0001 (BC_1, IOD(10), OUTPUT3, X, 2, 0, Z)," & "0000 (BC_1, IOD(10), INPUT, X) " ; -- ******************************************************************** -- * IEEE 1532 EXTENSION INFORMATION * -- ******************************************************************** attribute ISC_PIN_BEHAVIOR of ispGDX80VA_XXT100 : entity is "CLAMP" ; attribute ISC_STATUS of ispGDX80VA_XXT100 : entity is "Not Implemented"; attribute ISC_BLANK_USERCODE of ispGDX80VA_XXT100 : entity is "11111111111111111111111111111111"; attribute ISC_FLOW of ispGDX80VA_XXT100 : entity is "flow_verify(idcode) "& "initialize "& "(IDCODE WAIT TCK 1 32:10350043),"& "flow_enable "& "initialize "& "(ISC_ENABLE WAIT TCK 3, 1.0e-4),"& "flow_erase "& "initialize "& "(ISC_ERASE WAIT TCK 3, 2.2e-1),"& "flow_preload "& "initialize "& "(SAMPLE 243:0 WAIT TCK 1),"& "flow_program(array) "& "initialize "& "(ISC_ADDRESS_SHIFT 100:$addr=8000000000000000000000000"& " WAIT TCK 1)"& "repeat 100 "& "(ISC_DATA_SHIFT 160:? WAIT TCK 1)"& "(LSC_PROGRAM 100:$addr WAIT TCK 3, 12.0e-3)"& "(ISC_ADDRESS_SHIFT 100:$addr>>1 WAIT TCK 1),"& "flow_verify(array) "& "initialize "& "(ISC_ADDRESS_SHIFT 100:$addr=8000000000000000000000000"& " WAIT TCK 1)"& "repeat 100 "& "(ISC_READ WAIT TCK 3, 30.0e-6 160:?:CRC)"& "(ISC_ADDRESS_SHIFT 100:$addr>>1 WAIT TCK 1),"& "flow_read(array) "& "initialize "& "(ISC_ADDRESS_SHIFT 100:$addr=8000000000000000000000000"& " WAIT TCK 1)"& "repeat 100 "& "(ISC_READ WAIT TCK 3, 30.0e-6 160:!:CRC)"& "(ISC_ADDRESS_SHIFT 100:$addr>>1 WAIT TCK 1),"& "flow_program(usercode) "& "initialize "& "(USERCODE 32:? WAIT TCK 1)"& "(LSC_PROGRAM_USERCODE WAIT TCK 3, 12.0e-3),"& "flow_verify(usercode) "& "initialize "& "(USERCODE WAIT TCK 3 32:?),"& "flow_read(usercode) "& "initialize "& "(USERCODE WAIT TCK 3 32:!),"& "flow_program_security "& "initialize "& "(ISC_PROGRAM_SECURITY WAIT TCK 3, 40.0e-3),"& "flow_program_done "& "initialize "& "(ISC_NOOP WAIT TCK 1),"& "flow_disable "& "initialize "& "(ISC_DISABLE WAIT TCK 3, 1.0e-3)"; attribute ISC_PROCEDURE of ispGDX80VA_XXT100: entity is "proc_verify(idcode) = (flow_verify(idcode)),"& "proc_enable = (flow_enable),"& "proc_disable = (flow_disable),"& "proc_program(array) = (flow_program(array)),"& "proc_verify(array) = (flow_verify(array)),"& "proc_erase = (flow_erase),"& "proc_read(array) = (flow_read(array)),"& "proc_program(usercode) = (flow_program(usercode)),"& "proc_verify(usercode) = (flow_verify(usercode)),"& "proc_read(usercode) = (flow_read(usercode)),"& "proc_program_done = (flow_program_done),"& "proc_error_exit = (flow_disable),"& "proc_preload = (flow_preload),"& "proc_program_security = (flow_program_security)"; attribute ISC_ACTION of ispGDX80VA_XXT100 : entity is "erase = ( proc_verify(idcode),"& "proc_preload recommended,"& "proc_enable,"& "proc_erase,"& "proc_disable),"& "program = ( proc_verify(idcode),"& "proc_preload recommended,"& "proc_enable,"& "proc_erase,"& "proc_program(array),"& "proc_program(usercode),"& "proc_verify(array),"& "proc_verify(usercode),"& "proc_program_security optional,"& "proc_program_done,"& "proc_disable),"& "verify = ( proc_verify(idcode),"& "proc_preload recommended,"& "proc_enable,"& "proc_verify(array),"& "proc_verify(usercode),"& "proc_disable),"& "read = ( proc_verify(idcode),"& "proc_preload recommended,"& "proc_enable,"& "proc_read(array),"& "proc_read(usercode),"& "proc_disable),"& "verify_idcode = ( proc_verify(idcode)),"& "secure = ( proc_verify(idcode),"& "proc_preload recommended,"& "proc_enable,"& "proc_program_security,"& "proc_disable)"; end ispGDX80VA_XXT100;