-- ******************************************************************** -- * ispLSI5128VE 128 pin TQFP BSDL Model * -- * * -- * File Version: 1.05 * -- * File Date: 02/18/05 * -- * * -- * Standard Test Access Port and Boundary-Scan Architecture * -- * VHDL Description File * -- * * -- * This BSDL can be used for Boundary-Scan Test as well as * -- * ISC 1532 Programming support. * -- * * -- * This BSDL file is created according to: * -- * - IEEE 1532 2001 spec. * -- * - IEEE 1149.1 1994 spec. * -- * * -- * IEEE 1149.1 compliance and syntax verified by: * -- * - Lattice BSDL Syntax Checker * -- * - Agilent BSDL Syntax Checker * -- * - JTAG Technologies BSDL Verifier * -- * - Goepel BSDL Syntax Checker V3.0.1 * -- * * -- * Copyright 2000 - 2005 * -- * Lattice Semiconductor Corporation * -- * 5555 NE Moore Ct. * -- * Hillsboro, OR 97124 * -- * * -- * All rights reserved. No part of this program or publication * -- * may be reproduced, transmitted, transcribed, stored in a * -- * retrieval system, or translated into any language or * -- * computer language, in any form or by any means without this * -- * notice appearing within. * -- ******************************************************************** -- * * -- * IMPORTANT * -- * * -- * The following is a BSDL file that tests all of the I/O pins * -- * as bidirectional pins. The functionality of the BSCAN register * -- * for this device is independent of the pattern programmed * -- * into the device. An additional programming step is not * -- * required to configure the I/O pins prior to BSCAN test. * -- * * -- * This file contains additional information that may cause a BSDL * -- * parser to reject or error if your parser does not contain the * -- * 1532 library. BSDL files without ISC extensions are available * -- * on the Lattice website at www.latticesemi.com. * -- * * -- * For Further assistance, please contact Tech Support at * -- * 1-800-LATTICE or techsupport@latticesemi.com * -- ******************************************************************** -- * * -- * REVISION HISTORY * -- * * -- * Rev 1.05: 02/18/2005 * -- * - rcs: Changed ISC_PROGRAM to ISC_PROGRAM, and it's * -- * REGISTER_ACCESS to ISC_PDATA. * -- * - rcs: Changed proc_program(security) to proc_program(security) * -- * - rcs: Changed proc_program(array) to proprietary. * -- * - rcs: Changed proc_program(usercode) to proprietary. * -- * Rev 1.04: 11/29/2001 * -- * - Updated header. * -- * Rev 1.03: 09/20/2001 * -- * - Changed ISC_READ from 0x12 to 0x0A. * -- * - Added address shift to ISC_PROGRAM in flow_program. * -- * Rev 1.02: 08/07/2001 * -- * - Rename ISC_PROGRAM and LSC_PROGRAM_USERCODE to * -- * ISC_PROGRAM and LSC_PROGRAM_USERCODE and move them to Lattice * -- * specific instruction section. * -- * - Make proc_verify(idcode) mandatory. * -- * - Modified ISC_NOOP opcode from 11111 to 11001 and remove 11001 * -- * from PRIVATE instruction list. * -- * Rev 1.01: 7/10/2001 * -- * - Take ISC Instructions out from the PRIVATE instruction list * -- * - Changes ISC Erase instruction to "00011". * -- * - Moved HIGHZ instruction from Lattice Specific instruction to * -- * 1149.1 instruction list. * -- * - Remove ISC_SECURITY attribute. * -- * - Simplify verify and read flow from ISC_READ & ISC_DATA_SHIFT * -- * to ISC_READ only. * -- * - Move UBE instruction to Private instruction list. * -- * Rev 1.00: * -- * - Initial version. * -- * * -- ******************************************************************** -- The Overall Structure of the Entity Description entity ispLSI5128VE_XXLT128 is -- Generic Parameter Statement generic (PHYSICAL_PIN_MAP : string := "TQFP_128"); -- Logical Port Description Statement port ( TDI: in bit; -- JTAG input pin TMS: in bit; -- JTAG input pin TCK: in bit; -- JTAG input pin TDO: out bit; -- JTAG output pin RESET: in bit; -- Active low RESET pin GOE: in bit_vector (0 to 1); -- Global Output Enable Clk: in bit_vector (0 to 1); -- Clock input pins BIp: inout bit_vector (0 to 95); -- Bi-Directional pins VCC: linkage bit_vector (0 to 11); -- VCC pins GND: linkage bit_vector (0 to 10) -- GND pins ); -- Version Control use STD_1149_1_1994.all; -- 1149.1-1994 attributes use STD_1532_2001.all; -- Component Conformance Statement attribute COMPONENT_CONFORMANCE of ispLSI5128VE_XXLT128 : entity is "STD_1149_1_1993"; -- Device Package Pin Mapping attribute PIN_MAP of ispLSI5128VE_XXLT128 : entity is PHYSICAL_PIN_MAP; constant TQFP_128: PIN_MAP_STRING:= "TDI:20, "& -- JTAG (TDI) input pin "TMS:18, "& -- JTAG (TMS) input pin "TCK:19, "& -- JTAG (TCK) input pin "TDO:83, "& -- JTAG (TDO) output pin "RESET:85, "& -- RESET input pin "GOE:( 51, 52), "& -- Global OE pins "Clk:( 113, 114), "& -- Clock pins "BIp:( 22, 23, 24, 25, 26, 28, 30, "& -- I/O pins " 31, 32, 33, 34, 35, 36, 38, "& -- I/O pins " 39, 41, 42, 43, 44, 45, 46, "& -- I/O pins " 47, 48, 49, 54, 55, 56, 57, "& -- I/O pins " 58, 59, 60, 61, 62, 63, 64, "& -- I/O pins " 66, 68, 69, 70, 71, 72, 74, "& -- I/O pins " 76, 77, 78, 79, 80, 81, 87, "& -- I/O pins " 88, 89, 90, 91, 92, 93, 94, "& -- I/O pins " 95, 97, 98, 99, 101, 102, 103, "& -- I/O pins " 104, 105, 106, 107, 108, 109, 111, "& -- I/O pins " 112, 116, 117, 118, 119, 120, 121, "& -- I/O pins " 122, 124, 126, 127, 128, 1, 2, "& -- I/O pins " 3, 4, 5, 6, 8, 10, 11, "& -- I/O pins " 12, 13, 14, 15, 16), "& -- I/O pins "VCC:( 9, 21, 29, 40, 53, 65, 75, "& -- VCC pins " 86, 96, 115, 125, 84), "& -- VCC pins "GND:( 7, 17, 27, 37, 50, 67, 73, "& -- GND pins " 82, 100, 110, 123) "; -- GND pins -- Scan Port Identification attribute TAP_SCAN_CLOCK of TCK : Signal is (10.0e6, BOTH); attribute TAP_SCAN_IN of TDI : Signal is True; attribute TAP_SCAN_OUT of TDO : Signal is True; attribute TAP_SCAN_MODE of TMS : Signal is True; -- Instruction Register Description attribute INSTRUCTION_LENGTH of ispLSI5128VE_XXLT128 : entity is 5; attribute INSTRUCTION_OPCODE of ispLSI5128VE_XXLT128 : entity is -- 1149.1 instructions "BYPASS (11111), "& "SAMPLE (11100), "& "EXTEST (00000), "& "HIGHZ (11000), "& "IDCODE (10110), "& "USERCODE (10111), "& -- ISC instructions "ISC_NOOP (11001),"& "ISC_READ (01010),"& "ISC_ERASE (00011),"& "ISC_ENABLE (10101),"& "ISC_DISABLE (11110),"& "ISC_DISCHARGE (10100),"& "ISC_PROGRAM_SECURITY (01001),"& "ISC_DATA_SHIFT (00010),"& "ISC_ADDRESS_SHIFT (00001),"& "ISC_PROGRAM (00111),"& -- Lattice Specific and Private instructions "LSC_PROGRAM_USERCODE (11010),"& "PRIVATE (00100,00101,00110,01000,10010,"& "01100,01110,01111,10001,10011,"& "01011,11011,11101,10000)"; attribute INSTRUCTION_CAPTURE of ispLSI5128VE_XXLT128 : entity is "11001"; attribute INSTRUCTION_PRIVATE of ispLSI5128VE_XXLT128 : entity is "PRIVATE"; -- IDCODE Definition attribute IDCODE_REGISTER of ispLSI5128VE_XXLT128: entity is "0000"& -- version "0000001101101100"& -- part number (036C) "00000100001"& -- manufacturer's identity "1"; -- required by 1149.1 -- USERCODE Definition attribute USERCODE_REGISTER of ispLSI5128VE_XXLT128: entity is "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"; -- Register Access Description attribute REGISTER_ACCESS of ispLSI5128VE_XXLT128 : entity is "BOUNDARY (SAMPLE, EXTEST), "& "BYPASS (BYPASS, HIGHZ), "& "DEVICE_ID (USERCODE, IDCODE), "& "ISC_ADDRESS[318] (ISC_ADDRESS_SHIFT), "& "ISC_PDATA[318] (ISC_PROGRAM),"& "ISC_DATA[326] (ISC_DATA_SHIFT), "& "ISC_Rdata[326] (ISC_READ), "& "ISC_DEFAULT[1] (LSC_PROGRAM_USERCODE, ISC_PROGRAM_SECURITY, "& " ISC_DISCHARGE, ISC_DISABLE, ISC_ENABLE, "& " ISC_ERASE, ISC_NOOP)"; -- ***************************************************************** -- Boundary Scan Register Description, Cell 0 is the closest to TDO -- ***************************************************************** attribute BOUNDARY_LENGTH of ispLSI5128VE_XXLT128 : entity is 293; attribute BOUNDARY_REGISTER of ispLSI5128VE_XXLT128 : entity is -- num cell port function safe [ccell disval rslt] "0292 (BC_1, *, control, 0), "& "0291 (BC_1, BIp(0), output3, X, 292, 0, Z), "& "0290 (BC_1, BIp(0), input, X), "& "0289 (BC_1, *, control, 0), "& "0288 (BC_1, BIp(1), output3, X, 289, 0, Z), "& "0287 (BC_1, BIp(1), input, X), "& "0286 (BC_1, *, control, 0), "& "0285 (BC_1, BIp(2), output3, X, 286, 0, Z), "& "0284 (BC_1, BIp(2), input, X), "& "0283 (BC_1, *, control, 0), "& "0282 (BC_1, BIp(3), output3, X, 283, 0, Z), "& "0281 (BC_1, BIp(3), input, X), "& "0280 (BC_1, *, control, 0), "& "0279 (BC_1, BIp(4), output3, X, 280, 0, Z), "& "0278 (BC_1, BIp(4), input, X), "& "0277 (BC_1, *, control, 0), "& "0276 (BC_1, BIp(5), output3, X, 277, 0, Z), "& "0275 (BC_1, BIp(5), input, X), "& "0274 (BC_1, *, control, 0), "& "0273 (BC_1, BIp(6), output3, X, 274, 0, Z), "& "0272 (BC_1, BIp(6), input, X), "& "0271 (BC_1, *, control, 0), "& "0270 (BC_1, BIp(7), output3, X, 271, 0, Z), "& "0269 (BC_1, BIp(7), input, X), "& "0268 (BC_1, *, control, 0), "& "0267 (BC_1, BIp(8), output3, X, 268, 0, Z), "& "0266 (BC_1, BIp(8), input, X), "& "0265 (BC_1, *, control, 0), "& "0264 (BC_1, BIp(9), output3, X, 265, 0, Z), "& "0263 (BC_1, BIp(9), input, X), "& "0262 (BC_1, *, control, 0), "& "0261 (BC_1, BIp(10), output3, X, 262, 0, Z), "& "0260 (BC_1, BIp(10), input, X), "& "0259 (BC_1, *, control, 0), "& "0258 (BC_1, BIp(11), output3, X, 259, 0, Z), "& "0257 (BC_1, BIp(11), input, X), "& "0256 (BC_1, *, control, 0), "& "0255 (BC_1, BIp(12), output3, X, 256, 0, Z), "& "0254 (BC_1, BIp(12), input, X), "& "0253 (BC_1, *, control, 0), "& "0252 (BC_1, BIp(13), output3, X, 253, 0, Z), "& "0251 (BC_1, BIp(13), input, X), "& "0250 (BC_1, *, control, 0), "& "0249 (BC_1, BIp(14), output3, X, 250, 0, Z), "& "0248 (BC_1, BIp(14), input, X), "& "0247 (BC_1, *, control, 0), "& "0246 (BC_1, BIp(15), output3, X, 247, 0, Z), "& "0245 (BC_1, BIp(15), input, X), "& "0244 (BC_1, *, control, 0), "& "0243 (BC_1, BIp(16), output3, X, 244, 0, Z), "& "0242 (BC_1, BIp(16), input, X), "& "0241 (BC_1, *, control, 0), "& "0240 (BC_1, BIp(17), output3, X, 241, 0, Z), "& "0239 (BC_1, BIp(17), input, X), "& "0238 (BC_1, *, control, 0), "& "0237 (BC_1, BIp(18), output3, X, 238, 0, Z), "& "0236 (BC_1, BIp(18), input, X), "& "0235 (BC_1, *, control, 0), "& "0234 (BC_1, BIp(19), output3, X, 235, 0, Z), "& "0233 (BC_1, BIp(19), input, X), "& "0232 (BC_1, *, control, 0), "& "0231 (BC_1, BIp(20), output3, X, 232, 0, Z), "& "0230 (BC_1, BIp(20), input, X), "& "0229 (BC_1, *, control, 0), "& "0228 (BC_1, BIp(21), output3, X, 229, 0, Z), "& "0227 (BC_1, BIp(21), input, X), "& "0226 (BC_1, *, control, 0), "& "0225 (BC_1, BIp(22), output3, X, 226, 0, Z), "& "0224 (BC_1, BIp(22), input, X), "& "0223 (BC_1, *, control, 0), "& "0222 (BC_1, BIp(23), output3, X, 223, 0, Z), "& "0221 (BC_1, BIp(23), input, X), "& "0220 (BC_1, GOE(0), input, X), "& "0219 (BC_1, GOE(1), input, X), "& "0218 (BC_1, *, control, 0), "& "0217 (BC_1, BIp(24), output3, X, 218, 0, Z), "& "0216 (BC_1, BIp(24), input, X), "& "0215 (BC_1, *, control, 0), "& "0214 (BC_1, BIp(25), output3, X, 215, 0, Z), "& "0213 (BC_1, BIp(25), input, X), "& "0212 (BC_1, *, control, 0), "& "0211 (BC_1, BIp(26), output3, X, 212, 0, Z), "& "0210 (BC_1, BIp(26), input, X), "& "0209 (BC_1, *, control, 0), "& "0208 (BC_1, BIp(27), output3, X, 209, 0, Z), "& "0207 (BC_1, BIp(27), input, X), "& "0206 (BC_1, *, control, 0), "& "0205 (BC_1, BIp(28), output3, X, 206, 0, Z), "& "0204 (BC_1, BIp(28), input, X), "& "0203 (BC_1, *, control, 0), "& "0202 (BC_1, BIp(29), output3, X, 203, 0, Z), "& "0201 (BC_1, BIp(29), input, X), "& "0200 (BC_1, *, control, 0), "& "0199 (BC_1, BIp(30), output3, X, 200, 0, Z), "& "0198 (BC_1, BIp(30), input, X), "& "0197 (BC_1, *, control, 0), "& "0196 (BC_1, BIp(31), output3, X, 197, 0, Z), "& "0195 (BC_1, BIp(31), input, X), "& "0194 (BC_1, *, control, 0), "& "0193 (BC_1, BIp(32), output3, X, 194, 0, Z), "& "0192 (BC_1, BIp(32), input, X), "& "0191 (BC_1, *, control, 0), "& "0190 (BC_1, BIp(33), output3, X, 191, 0, Z), "& "0189 (BC_1, BIp(33), input, X), "& "0188 (BC_1, *, control, 0), "& "0187 (BC_1, BIp(34), output3, X, 188, 0, Z), "& "0186 (BC_1, BIp(34), input, X), "& "0185 (BC_1, *, control, 0), "& "0184 (BC_1, BIp(35), output3, X, 185, 0, Z), "& "0183 (BC_1, BIp(35), input, X), "& "0182 (BC_1, *, control, 0), "& "0181 (BC_1, BIp(36), output3, X, 182, 0, Z), "& "0180 (BC_1, BIp(36), input, X), "& "0179 (BC_1, *, control, 0), "& "0178 (BC_1, BIp(37), output3, X, 179, 0, Z), "& "0177 (BC_1, BIp(37), input, X), "& "0176 (BC_1, *, control, 0), "& "0175 (BC_1, BIp(38), output3, X, 176, 0, Z), "& "0174 (BC_1, BIp(38), input, X), "& "0173 (BC_1, *, control, 0), "& "0172 (BC_1, BIp(39), output3, X, 173, 0, Z), "& "0171 (BC_1, BIp(39), input, X), "& "0170 (BC_1, *, control, 0), "& "0169 (BC_1, BIp(40), output3, X, 170, 0, Z), "& "0168 (BC_1, BIp(40), input, X), "& "0167 (BC_1, *, control, 0), "& "0166 (BC_1, BIp(41), output3, X, 167, 0, Z), "& "0165 (BC_1, BIp(41), input, X), "& "0164 (BC_1, *, control, 0), "& "0163 (BC_1, BIp(42), output3, X, 164, 0, Z), "& "0162 (BC_1, BIp(42), input, X), "& "0161 (BC_1, *, control, 0), "& "0160 (BC_1, BIp(43), output3, X, 161, 0, Z), "& "0159 (BC_1, BIp(43), input, X), "& "0158 (BC_1, *, control, 0), "& "0157 (BC_1, BIp(44), output3, X, 158, 0, Z), "& "0156 (BC_1, BIp(44), input, X), "& "0155 (BC_1, *, control, 0), "& "0154 (BC_1, BIp(45), output3, X, 155, 0, Z), "& "0153 (BC_1, BIp(45), input, X), "& "0152 (BC_1, *, control, 0), "& "0151 (BC_1, BIp(46), output3, X, 152, 0, Z), "& "0150 (BC_1, BIp(46), input, X), "& "0149 (BC_1, *, control, 0), "& "0148 (BC_1, BIp(47), output3, X, 149, 0, Z), "& "0147 (BC_1, BIp(47), input, X), "& "0146 (BC_1, RESET, input, X), "& "0145 (BC_1, *, control, 0), "& "0144 (BC_1, BIp(95), output3, X, 145, 0, Z), "& "0143 (BC_1, BIp(95), input, X), "& "0142 (BC_1, *, control, 0), "& "0141 (BC_1, BIp(94), output3, X, 142, 0, Z), "& "0140 (BC_1, BIp(94), input, X), "& "0139 (BC_1, *, control, 0), "& "0138 (BC_1, BIp(93), output3, X, 139, 0, Z), "& "0137 (BC_1, BIp(93), input, X), "& "0136 (BC_1, *, control, 0), "& "0135 (BC_1, BIp(92), output3, X, 136, 0, Z), "& "0134 (BC_1, BIp(92), input, X), "& "0133 (BC_1, *, control, 0), "& "0132 (BC_1, BIp(91), output3, X, 133, 0, Z), "& "0131 (BC_1, BIp(91), input, X), "& "0130 (BC_1, *, control, 0), "& "0129 (BC_1, BIp(90), output3, X, 130, 0, Z), "& "0128 (BC_1, BIp(90), input, X), "& "0127 (BC_1, *, control, 0), "& "0126 (BC_1, BIp(89), output3, X, 127, 0, Z), "& "0125 (BC_1, BIp(89), input, X), "& "0124 (BC_1, *, control, 0), "& "0123 (BC_1, BIp(88), output3, X, 124, 0, Z), "& "0122 (BC_1, BIp(88), input, X), "& "0121 (BC_1, *, control, 0), "& "0120 (BC_1, BIp(87), output3, X, 121, 0, Z), "& "0119 (BC_1, BIp(87), input, X), "& "0118 (BC_1, *, control, 0), "& "0117 (BC_1, BIp(86), output3, X, 118, 0, Z), "& "0116 (BC_1, BIp(86), input, X), "& "0115 (BC_1, *, control, 0), "& "0114 (BC_1, BIp(85), output3, X, 115, 0, Z), "& "0113 (BC_1, BIp(85), input, X), "& "0112 (BC_1, *, control, 0), "& "0111 (BC_1, BIp(84), output3, X, 112, 0, Z), "& "0110 (BC_1, BIp(84), input, X), "& "0109 (BC_1, *, control, 0), "& "0108 (BC_1, BIp(83), output3, X, 109, 0, Z), "& "0107 (BC_1, BIp(83), input, X), "& "0106 (BC_1, *, control, 0), "& "0105 (BC_1, BIp(82), output3, X, 106, 0, Z), "& "0104 (BC_1, BIp(82), input, X), "& "0103 (BC_1, *, control, 0), "& "0102 (BC_1, BIp(81), output3, X, 103, 0, Z), "& "0101 (BC_1, BIp(81), input, X), "& "0100 (BC_1, *, control, 0), "& "0099 (BC_1, BIp(80), output3, X, 100, 0, Z), "& "0098 (BC_1, BIp(80), input, X), "& "0097 (BC_1, *, control, 0), "& "0096 (BC_1, BIp(79), output3, X, 97, 0, Z), "& "0095 (BC_1, BIp(79), input, X), "& "0094 (BC_1, *, control, 0), "& "0093 (BC_1, BIp(78), output3, X, 94, 0, Z), "& "0092 (BC_1, BIp(78), input, X), "& "0091 (BC_1, *, control, 0), "& "0090 (BC_1, BIp(77), output3, X, 91, 0, Z), "& "0089 (BC_1, BIp(77), input, X), "& "0088 (BC_1, *, control, 0), "& "0087 (BC_1, BIp(76), output3, X, 88, 0, Z), "& "0086 (BC_1, BIp(76), input, X), "& "0085 (BC_1, *, control, 0), "& "0084 (BC_1, BIp(75), output3, X, 85, 0, Z), "& "0083 (BC_1, BIp(75), input, X), "& "0082 (BC_1, *, control, 0), "& "0081 (BC_1, BIp(74), output3, X, 82, 0, Z), "& "0080 (BC_1, BIp(74), input, X), "& "0079 (BC_1, *, control, 0), "& "0078 (BC_1, BIp(73), output3, X, 79, 0, Z), "& "0077 (BC_1, BIp(73), input, X), "& "0076 (BC_1, *, control, 0), "& "0075 (BC_1, BIp(72), output3, X, 76, 0, Z), "& "0074 (BC_1, BIp(72), input, X), "& "0073 (BC_1, CLK(0), input, X), "& "0072 (BC_1, CLK(1), input, X), "& "0071 (BC_1, *, control, 0), "& "0070 (BC_1, BIp(71), output3, X, 71, 0, Z), "& "0069 (BC_1, BIp(71), input, X), "& "0068 (BC_1, *, control, 0), "& "0067 (BC_1, BIp(70), output3, X, 68, 0, Z), "& "0066 (BC_1, BIp(70), input, X), "& "0065 (BC_1, *, control, 0), "& "0064 (BC_1, BIp(69), output3, X, 65, 0, Z), "& "0063 (BC_1, BIp(69), input, X), "& "0062 (BC_1, *, control, 0), "& "0061 (BC_1, BIp(68), output3, X, 62, 0, Z), "& "0060 (BC_1, BIp(68), input, X), "& "0059 (BC_1, *, control, 0), "& "0058 (BC_1, BIp(67), output3, X, 59, 0, Z), "& "0057 (BC_1, BIp(67), input, X), "& "0056 (BC_1, *, control, 0), "& "0055 (BC_1, BIp(66), output3, X, 56, 0, Z), "& "0054 (BC_1, BIp(66), input, X), "& "0053 (BC_1, *, control, 0), "& "0052 (BC_1, BIp(65), output3, X, 53, 0, Z), "& "0051 (BC_1, BIp(65), input, X), "& "0050 (BC_1, *, control, 0), "& "0049 (BC_1, BIp(64), output3, X, 50, 0, Z), "& "0048 (BC_1, BIp(64), input, X), "& "0047 (BC_1, *, control, 0), "& "0046 (BC_1, BIp(63), output3, X, 47, 0, Z), "& "0045 (BC_1, BIp(63), input, X), "& "0044 (BC_1, *, control, 0), "& "0043 (BC_1, BIp(62), output3, X, 44, 0, Z), "& "0042 (BC_1, BIp(62), input, X), "& "0041 (BC_1, *, control, 0), "& "0040 (BC_1, BIp(61), output3, X, 41, 0, Z), "& "0039 (BC_1, BIp(61), input, X), "& "0038 (BC_1, *, control, 0), "& "0037 (BC_1, BIp(60), output3, X, 38, 0, Z), "& "0036 (BC_1, BIp(60), input, X), "& "0035 (BC_1, *, control, 0), "& "0034 (BC_1, BIp(59), output3, X, 35, 0, Z), "& "0033 (BC_1, BIp(59), input, X), "& "0032 (BC_1, *, control, 0), "& "0031 (BC_1, BIp(58), output3, X, 32, 0, Z), "& "0030 (BC_1, BIp(58), input, X), "& "0029 (BC_1, *, control, 0), "& "0028 (BC_1, BIp(57), output3, X, 29, 0, Z), "& "0027 (BC_1, BIp(57), input, X), "& "0026 (BC_1, *, control, 0), "& "0025 (BC_1, BIp(56), output3, X, 26, 0, Z), "& "0024 (BC_1, BIp(56), input, X), "& "0023 (BC_1, *, control, 0), "& "0022 (BC_1, BIp(55), output3, X, 23, 0, Z), "& "0021 (BC_1, BIp(55), input, X), "& "0020 (BC_1, *, control, 0), "& "0019 (BC_1, BIp(54), output3, X, 20, 0, Z), "& "0018 (BC_1, BIp(54), input, X), "& "0017 (BC_1, *, control, 0), "& "0016 (BC_1, BIp(53), output3, X, 17, 0, Z), "& "0015 (BC_1, BIp(53), input, X), "& "0014 (BC_1, *, control, 0), "& "0013 (BC_1, BIp(52), output3, X, 14, 0, Z), "& "0012 (BC_1, BIp(52), input, X), "& "0011 (BC_1, *, control, 0), "& "0010 (BC_1, BIp(51), output3, X, 11, 0, Z), "& "0009 (BC_1, BIp(51), input, X), "& "0008 (BC_1, *, control, 0), "& "0007 (BC_1, BIp(50), output3, X, 8, 0, Z), "& "0006 (BC_1, BIp(50), input, X), "& "0005 (BC_1, *, control, 0), "& "0004 (BC_1, BIp(49), output3, X, 5, 0, Z), "& "0003 (BC_1, BIp(49), input, X), "& "0002 (BC_1, *, control, 0), "& "0001 (BC_1, BIp(48), output3, X, 2, 0, Z), "& "0000 (BC_1, BIp(48), input, X)"; -- ************************************************************************ -- * IEEE 1532 EXTENSION INFORMATION * -- ************************************************************************ attribute ISC_PIN_BEHAVIOR of ispLSI5128VE_XXLT128 : entity is "CLAMP" ; attribute ISC_STATUS of ispLSI5128VE_XXLT128 : entity is "Not Implemented"; attribute ISC_BLANK_USERCODE of ispLSI5128VE_XXLT128 : entity is "11111111111111111111111111111111"; attribute ISC_FLOW of ispLSI5128VE_XXLT128 : entity is "flow_verify(idcode) "& "initialize "& "(IDCODE WAIT TCK 1 32:0036C043), "& "flow_enable "& "initialize "& "(ISC_ENABLE WAIT TCK 3, 1.0e-4), "& "flow_erase "& "initialize "& "(ISC_ERASE WAIT TCK 3, 2.2e-1), "& "flow_preload "& "initialize "& "(SAMPLE 293:0 WAIT TCK 1), "& "flow_program(array) "& "initialize "& "(ISC_ADDRESS_SHIFT 318:$addr=20000000000000000000000000000000"& "000000000000000000000000000000000000000000000000 WAIT TCK 1) "& "repeat 318 "& "(ISC_DATA_SHIFT 326:? WAIT TCK 1) "& "(ISC_PROGRAM 318:$addr WAIT TCK 3, 12.0e-3) "& "(ISC_ADDRESS_SHIFT 318:$addr>>1 WAIT TCK 1), "& "flow_verify(array) "& "initialize "& "(ISC_ADDRESS_SHIFT 318:$addr=20000000000000000000000000000000"& "000000000000000000000000000000000000000000000000 WAIT TCK 1) "& "repeat 318 "& "(ISC_READ WAIT TCK 3, 30.0e-6 326:?:CRC)"& "(ISC_ADDRESS_SHIFT 318:$addr>>1 WAIT TCK 1), "& "flow_read(array) "& "initialize "& "(ISC_ADDRESS_SHIFT 318:$addr=20000000000000000000000000000000"& "000000000000000000000000000000000000000000000000 WAIT TCK 1) "& "repeat 318 "& "(ISC_READ WAIT TCK 3, 30.0e-6 326:!:CRC)"& "(ISC_ADDRESS_SHIFT 318:$addr>>1 WAIT TCK 1), "& "flow_program(usercode) "& "initialize "& "(USERCODE 32:? WAIT TCK 1) "& "(LSC_PROGRAM_USERCODE WAIT TCK 3, 12.0e-3), "& "flow_verify(usercode) "& "initialize "& "(USERCODE WAIT TCK 3 32:?), "& "flow_read(usercode) "& "initialize "& "(USERCODE WAIT TCK 3 32:!), "& "flow_program_security "& "initialize "& "(ISC_PROGRAM_SECURITY WAIT TCK 3, 12.0e-3), "& "flow_disable "& "initialize "& "(ISC_DISABLE WAIT TCK 3, 1.0e-3), "& "flow_program_done "& "initialize "& "(ISC_NOOP WAIT TCK 1)"; attribute ISC_PROCEDURE of ispLSI5128VE_XXLT128: entity is "proc_verify(idcode) = (flow_verify(idcode)), "& "proc_enable = (flow_enable), "& "proc_disable = (flow_disable), "& "proc_program(array) = (flow_program(array)), "& "proc_verify(array) = (flow_verify(array)), "& "proc_erase = (flow_erase), "& "proc_read(array) = (flow_read(array)), "& "proc_program(usercode) = (flow_program(usercode)), "& "proc_verify(usercode) = (flow_verify(usercode)), "& "proc_read(usercode) = (flow_read(usercode)), "& "proc_program_done = (flow_program_done), "& "proc_error_exit = (flow_disable), "& "proc_preload = (flow_preload), "& "proc_program(security) = (flow_program_security)"; attribute ISC_ACTION of ispLSI5128VE_XXLT128 : entity is "erase = ( proc_verify(idcode), "& "proc_preload recommended, "& "proc_enable, "& "proc_erase, "& "proc_disable), "& "program = ( proc_verify(idcode), "& "proc_preload recommended, "& "proc_enable, "& "proc_erase, "& "proc_program(array) proprietary, "& "proc_program(usercode) proprietary, "& "proc_verify(array), "& "proc_verify(usercode), "& "proc_program(security) optional, "& "proc_program_done, "& "proc_disable), "& "verify = ( proc_verify(idcode), "& "proc_preload recommended, "& "proc_enable, "& "proc_verify(array), "& "proc_verify(usercode), "& "proc_disable), "& "read = ( proc_verify(idcode), "& "proc_preload recommended, "& "proc_enable, "& "proc_read(array), "& "proc_read(usercode), "& "proc_disable), "& "verify_idcode = ( proc_verify(idcode)), "& "secure = ( proc_verify(idcode), "& "proc_preload recommended, "& "proc_enable, "& "proc_program(security), "& "proc_disable)"; end ispLSI5128VE_XXLT128;